Bio-rad Microplate Manager Software Manual de usuario descargar pdf (Pagina 20)

Microplate Manager User Guide

When you open a protocol, Microplate Manager will look first for a reader at the

serial port you select. If a reader is not found at that port, the software will scan the

remaining ports as well as the SCSI bus for a reader.

If a reader is found at a particular port, that port will be selected. If no reader is found

at any serial port or the SCSI port, you will receive an error message.

2.7 Setting Filters

If you change the filters in the Ultramark or Model 550 microplate readers, you can

specify the wavelengths of the new filters from within Microplate Manager.

(Benchmark users should refer to the hardware manual for instructions on changing

filter settings.)

2.7.1 Ultramark Setup

Select Ultramark Setup from the OPTIONS menu

Figure 4. Ultramark Setup dialog box.

For each filter, enter the appropriate wavelength. The wavelengths of the filters that

are shipped with the Ultramark will be included with your Ultramark documentation.

If you change any of the filters, you will need to change these settings.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 137 138

Sin comentarios

Bio-rad Microplate Manager Software Manual de usuario Pagina 20